Accvacs TSV Medical Series Touch Screen Vacuum Sealer with Gas Purge Seal 20 ” X 1/4″

Accvacs TSV Medical Series Touch Screen Vacuum Sealer with Gas Purge Seal 20 ” X 1/4″
Place you new ACCVACS Sealer on a work table.
Connect a 1/4″ O.D. Plastic tubing to the Push-in fitting on back Of the Machine labeled AIR and supply clean dry Compressed Air between 80 and 100 PSI.
if you use the Gas purge option, Connect a 1/4″ O.D. Plastic tubing to the Push-in fitting on back of the Machine labeled GAS and supply an inert Gas at low pressure between 25 and 50 PSI.
Insert the electrical plug to a 110/120 VAC. Or a 220/240 VAC 50/60 Cycle outlet. (according to the voltage of the machine you Purchased) and turn the Machine ON.

• CLEAN ROOM COMPATIBLE
• ACCVACS TOUCH SCREEN CONTROLS
• FAST P I D TEMPERATURE CONTROL WITH AUTO-TUNE
• VACUUM GAUGE
• PASSWORD PROTECTED FIVE BAG PRESET MENU
• STAINLESS STEEL RETRACTING NOZZLE
• NO PINCH SAFETY JAW & OVER HEAT PROTECTION
• ELECTRONIC FOOT SWITCH START & E STOP
• Serial Communication Port
• Ethernet Communication port
• Vacuum Filter ( for Packing with Liquids )
• With out GAS PURGE
• Dual Nozzle ( for faster Packaging )
• International Voltages ( 220/240 AC or 100 AC )