SKU:SCO10A
Weight:400 lbs.
Interior Volume, Nominal : 10 cu.ft. (285 liters)
Interior Dimensions W x D x H : 20.5" x 19.7" x 21.5"
52.1 x 50.0 x 54.6cm
Exterior Dimensions W x D x H : 27.3" x 28.5" x 75.5"
69.3 x 72.4 x 191.7cm
Interior Construction : 300 series stainless steel
Exterior Construction : 20 gauge steel, powder coated
Shelves (See Accessories)* : 6 standard, 16 total
Maximum Weight Per Shelf* : 35 lbs/15.8kg
Permitted Total Load : 105 lbs/47.6kg
*Extra standard and reinforced shelves available. See Accessories.
Electrical, 50/60Hz, AC, 1Ø
Voltage :110V-120V
Full Load Amps :12.0*
Nominal Power (watts @37°C) :210
Recommended Breaker, Amps :15
Power Cord Supplied :NEMA5-15P
CO2 Range :1-20%
Recovery CO2 at 5%** :< 5min.
Sensor Type :Infrared
Temperature Uniformity : At 37°C ± 0.25°C
Temperature Recovery 37°C** :Recovery to 37°C After 30 sec. Door Opening
2.0 min.
Temperature Range
Ambient to 5° to 60°C : Yes
*SCO10A: 6 amps per unit, 12 amps total. SCO10A-2: 3.0 amps per unit, 6 amps total.
**To 98% of set value.
DIN 12880 Compliance
SCO Air Jacketed CO2 Incubators are designed to meet or exceed the performance criteria established through DIN 12880:2007:05 and ASTM E1292-94 (Reapproved 2006.).
Note: DIN 12880 is an international standard for measuring the performance of electrical laboratory ovens and incubators based on Deutsches Institut Fur Normung E.V. (German National Standard), 05/01/2007.