SKU:SCO6AD
Weight:238 lbs.
Interior Volume, Nominal : 5.9 cu.ft. (167 liters)
Interior Dimensions W x D x H : 20.2" x 20.0" x 25.5"
51.3 x 50.8 x 64.7cm
Exterior Dimensions W x D x H : 28.5" x 30.8" x 39.5"
72.4 x 78.2 x 100.3cm
Interior Construction : 300 series stainless steel
Exterior Construction : 20 gauge steel,
powder coated
Shelves (See Accessories)* : 3 standard, 8 total
Maximum Weight Per Shelf* : 35 lbs/15.8kg
Permitted Total Load : 105 lbs/47.6kg
*Extra standard and reinforced shelves available. See Accessories.
Electrical, 50/60Hz, AC, 1Ø
Voltage :110V-120V
Full Load Amps :12
Nominal Power (watts @37°C) :130
Recommended Breaker, Amps :15
Power Cord Supplied :NEMA5-15P
CO2 Range :1-20%
Recovery CO2 at 5%* :< 5min.
Sensor Type :Infrared
Temperature Uniformity : At 37°C ± 0.25°C
Humidity Range Passive (Ambient 95%) :Yes
Temperature Range Recovery 37°C* : Recovery to 37°C after 30 sec. Door Opening 6.0 min.
*To 98% of set value.
DIN 12880 Compliance
SHEL LAB SCO6AD High Heat Decontamination CO2 Incubator is designed to meet or exceed the performance criteria established through DIN 12880:2007:05 and ASTM E1292-94 (Reapproved 2006.).
Note: DIN 12880 is an international standard for measuring the performance of electrical laboratory ovens and incubators based on Deutsches Institut Fur Normung E.V. (German National Standard), 05/01/2007.