Nitrox Analyser AII-3000 Series
  • Oxygen AnalyzerOxygen Meters Portable AII-3000 Series

Oxygen AnalyzerOxygen Meters Portable AII-3000 Series


Savings: $145.00

Availability:: Usually Ships in 1 to 2 Weeks

Add to wishlist
SKU: AII-3000


Nitrox Analyser for Diving AII-3000 Series

Analytical Industries? AII-3000 series oxygen analyzers provide a very easy way to verify oxygen in diving applications. These inexpensive gas analyzers measure and display the concentration of oxygen in compressed breathing air tanks intended for scuba diving, for personnel safety, area monitoring, O2 deficiency in confined spaces, checking breathing air tanks and confirming the O2 levels prior to welding. The devices utilize an electrochemical galvanic fuel cell type oxygen sensor of the type that is extensively used to measure oxygen concentrations from 0% to 100% in gas streams.

Standard Features

  • 0-100% O2 measurement range
  • Long sensor life up to 60 months (AII-3000)
  • Integrated or remote sensors
  • Fast response time of T90 in <10 seconds

Additional information

Weight1 lbs
Dimensions12 × 6 × 6 in

< ?2% of FS range under constant conditions

Response Time

T90 < 10 Seconds

Sensitivity (LDL)


Sensor Model

"AII-11-60 (remote sensor) AII-11-60-HC"


?1% Under Constant Conditions

  • Measurement Range: 0-100%Oxygen
  • Accuracy: <?2% of FS range under constant conditions
  • Response Time: T90 < 10 seconds
  • Sensitivity (LDL): 0.50%
  • Linearity: ?1% under constant conditons
  • Sensor Model: AII-11-60 (Remote Sensor) AII-11-60-HC
  • Sensor Life at 25?C (77?F) and 1 Atmosphere: 60 months in air 5?C (77?F) and 1 atmosphere
  • Calibration Interval: Prior to use and after 8 hours operation
  • Inlet Pressure: Ambient of 0.34-2 barg (5-30 psig) for flow through connector
  • Flow Rate (constant): 0.2-10 NI/min (0.4-20 SCFH)
  • Gas Connections: 1×16 mm thread 1/4″ tube for remote sensors see accessories for additional connectors
  • Display: 3 1/2 digit backlit LCD 7 x 3.5cm (2.75 x 1.375″); resolution 0.1
  • Dimensions: 9.1 x 14.9 x 4cm (3.6 x 5.9 x 1.6″)
  • Weight: 280g (10oz)
  • Compensation: Temperature compensated
  • Alarms: User adjustable HI and LO alarms (AII-3000 M and MHC only)
  • Storage Temperature: -20?C to +60?C (-4?F to 140?F) on intermittent basis
  • Operating Temperature: 5 to 45?C (41?F to 113?F)
  • Power: 2AA Alkaline batteries
  • Battery Life: Up to 1200 hrs
  • Humidity: Non-condensing 0-95% RH
  • Warm up time: None
  • Approvals: ISO 9001: 2000, MDD 93/42/Annex II, ISO 13485; 2003


There are no reviews yet.

Be the first to review “Oxygen AnalyzerOxygen Meters Portable AII-3000 Series”

Your email address will not be published. Required fields are marked *

    Your Cart
    Your cart is emptyReturn to Shop
    Wishlist 0
    Open wishlist page Continue shopping