Nitrox Palm O2
  • Oxygen Meter Compact Palm-O2

Oxygen Meter Compact Palm-O2

$350.00

Savings: $75.00

Availability:: Usually Ships in 1 to 2 Weeks

Add to wishlist
SKU: Palm-O2

Description

Nitrox Analyser for Diving Palm O2

Palm O2 Oxygen analyzers provide a very easy way to verify oxygen in diving applications. These inexpensive gas analyzers measure and display the concentration of oxygen in compressed breathing air tanks intended for scuba diving, for personnel safety, area monitoring, O2 deficiency in confined spaces, checking breathing air tanks and confirming the O2 levels prior to welding. The devices utilize an electrochemical galvanic fuel cell type oxygen sensor of the type that is extensively used to measure oxygen concentrations from 0% to 100% in gas streams.

    Standard Features

    • 0-100% O2 measurement range
    • Battery life up to 13,000 hours of continuous use (Palm O2)
    • Integrated or remote sensors
    • Fast response time of T90 in <10 seconds

    Additional information

    Weight5 lbs
    Dimensions8 × 8 × 8 in
    Accuracy

    < ?2% of FS range under constant conditions

    Response Time

    T90 < 10 Seconds

    Sensitivity (LDL)

    0.005

    Linearity

    ?1% Under Constant Conditions

    Sensor Model

    "AII-11-75-PO2 AII-11-75-PO2-D (for diving)"

    • Measurement Range: 0-100%Oxygen
    • Accuracy: <?2% of FS range under constant conditions
    • Response Time: T90 < 10 seconds
    • Sensitivity (LDL): 0.50%
    • Linearity: ?1% under constant conditons
    • Sensor Model: AII-11-75-PO2 AII-11-75-PO2-D (For diving)
    • Sensor Life at 25?C (77?F) and 1 Atmosphere: 32 months in air 5?C (77?F) and 1 atmosphere
    • Calibration Interval: Prior to use and after 8 hours operation
    • Inlet Pressure: Ambient of 0.34-2 barg (5-30 psig) for flow through connector
    • Flow Rate (constant): 0.2-10 NI/min (0.4-20 SCFH)
    • Gas Connections: 1×16 mm thread 1/4″ tube for remote sensors see accessories for additional connectors
    • Display: 3 digit LCD 2.8 x 1.6cm (1.1 x 0.625″); resolution 0.1
    • Dimensions: 6.9 x 10.4 x 3.4cm (2.72″ x 4.1″ x 1.35″)
    • Weight: 196g (7oz)
    • Compensation: Temperature compensated
    • Alarms: User adjustable HI and LO alarms (AII-3000 M and MHC only)
    • Storage Temperature: -20?C to +60?C (-4?F to 140?F) on intermittent basis
    • Operating Temperature: 5 to 45?C (41?F to 113?F)
    • Power: 2AA Alkaline batteries
    • Battery Life: Up to 1300 hrs
    • Humidity: Non-condensing 0-95% RH
    • Warm up time: None
    • Approvals: None

    Reviews

    There are no reviews yet.

    Be the first to review “Oxygen Meter Compact Palm-O2”

    Your email address will not be published. Required fields are marked *

    0
      0
      Your Cart
      Your cart is emptyReturn to Shop
      Wishlist 0
      Open wishlist page Continue shopping