Home > Storage & Material Handling > Drying Cabinets >

Staber Drying Cabinets , Stainless Steel Evenly Spaced 5 Shelf Drying Cabinet


Staber Drying Cabinets , Stainless Steel Evenly Spaced 5 Shelf Drying Cabinet
Staber Drying Cabinets , Stainless Steel Evenly Spaced 5 Shelf Drying Cabinet


 
Our Price: $3,505.00

Availability:: Usually Ships in 2 to 3 Weeks
Product Code: SDCSS-5

Shelf



Qty:  
DESCRIPTION Standard Options Specifications
 
The Staber Drying Cabinet is manufactured with the highest quality materials, and is designed for ease of use and long-lasting  durability. The overall design offers wide flexibility to both warm and dry a wide variety of items in the medical environment, with a focus on the need to be able to dry items that cannot be dried using a traditional action tumble dryer. Our cabinets are designed for many years of service with easy access to all major components for easy removal and installation of  replacement parts, should the unit need to be repaired.
Standard Features
  • Electrical Configuration: Both units require a 120 volt power source, using a single phase 15 Amp breaker. They are shipped with a standard 12 ft. long/3 prong electrical plug that can be plugged into a standard electrical outlet.
    Heating Element: One 1200 watt 120v heating element delivers heat to the cabinet’s interior. The heating unit’s access & temperature of 150F, with 70F ambient room air temperature. The heating element is mounted to the heater using 20-guage cold rolled steel mounting brackets. The heaters air outlet, also constructed of 20-guage steel, evenly distributes heated air throughout the interior of the cabinet.
    Blower Motor: The blower motor is bolted to the top frame under the unit’s top cover. An axel fan is utilized to blow an approximate mixture of 50% fresh % 50% recirculated air across the heating element.
    Ventilation: Ventilation is at the user’s discretion. However, both units have a 4” diameter opening on the top of the cabinet, if ducted ventilation is desired by the user.
    Inducted Air: There is a 7.5” x 2” opening on the top of the cabinet, located 1 ¾”-3 ¾” from right sidewall and centered from the front to the back of the unit.
    Cabinet Construction: Model SDC-5 has a white powder coat finish steel cabinet and door, and Model SDCSS-5 has a stainless steel cabinet and door.
    *For both adequate incoming air & ventilation, it is recommended to have a minimum of 4” of clearance above the top of the cabinet to any ceiling, and at least 2” of clearance from any walls from the back and sides of the cabinet. The minimum suggested enclosed space to install the cabinet within is 71.5” H x 27.5”W x 26.5” D, is the unit will be used in a confined space ( with an open front area only, or a door that can be opened during use to allow proper ventilation of air).

Share your knowledge of this product. Be the first to write a review »