Contact Sales: 1-(714) 754-6660
Airlock pass-through transfer chamber minimizes nitrogen
Gas-in port & pressure relief valve is required when
Single or multi-cord air-tight cord grips, ranging from cord
Hospital-grade power strip with four power outlets.
Epoxy powder coated steel stand with caster (including two
Dry box gloves/bare hand entry (IRIS port).
Automatic purge control unit with RH or O2 sensor.
SAE 304 Stainless Steel tray/work surface.
Shipping Weight : 150 lbs
Shipping Dimensions : 36 × 25 × 31 in
Part No. : 2700-2-B
Configuration : Vacuum Negative Pressure
No. of Glove Ports : 2
Chamber Volume : Small ~ 5 cu.ft.
Main Chamber Dimension : 24x16x18
Material: Clear Acrylic
1” wall reinforced Acrylic construction
Overall Dimensions (Main Chamber): 26’’ W x 18” D x 20” H;
Internal Dimensions (Main Chamber): 24’’ W x 16” D x 18” H
Two removable glove covers
Fully removable top lid for easy transfer of large parts
Two vacuum valves with barbed fitting for vacuum and
Two 8” OD glove ports that accept standard dry box gloves
Vacuum Gauge 0-30 in for monitoring main chamber and airlock
Back to top