Yamato Fine Oven Programmable 1000L 220V 3 PHASE 22A 50/60Hz

System : Forced air circulation and ventilation

Operating temp. range : Room temp. +15?C~200?C

Temperature fluctuation : ?0.5?C (at 200?C)

Temperature slope : 15?C (at 200?C)

Temperature controller : PID Z control

Temp. setting method : Digital setting with ?/? keys
Timer : 0 min~99 hrs 59 min (Resolution: 1 minute or 1 hour)

Operation functions : Fixed temperature operation, Program operation (Maximum 99 steps, up to 99 patterns, repeat operation function) Duration/time select timer operation function (Fixed temperature operation, auto start/auto stop/quick auto stop, program operation auto start)

Additional functions : Accumulated Power on and Operation Time (up to 65,535 hours); Calendar Time (24 hours); Calibration Offset; Monitor Display of Accumulated Power Consumption, Total CO2 Emission, and Heater operating Output; Power Recovery Mode; User Settings Save and Restore Function; Fan Speed Setting Function

Sensor : K-thermocouple (double sensor)

Heater : Stainless steel pipe heater with a fan 6.0kW

Fan motor : Stainless steel axial flow fan (capacitor motor: 20W), Two motors used for Model1032

Cable port : I.D. ?30mm (rear)

Heat insulator : Glass wool

Other additional structure : Exhaust damper (manual operation)

Safety device : Self-diagnostic functions (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), Door switch,

Fan Failure Detection, key lock, independent overheat protection, electric leakage breaker with over current protection

Internal dimensions (WxDxH) : 1,000 x 1,000 x 1,000mm

External dimensions (WxDxH) : 1,700 x 1,215 x 1,530mm

Internal capacity : 1000L

Power source : 3 phase AC220V 17A

Weight : ~450kg

Shelf / bracket : 3 pcs. / 6 pcs.