System : Forced air circulation and ventilation
Operating temp. range : Room temp. +15°C~300°C
Temperature fluctuation : ±1.0°C (at 300°C)
Temperature slope : 20°C (at 300°C)
Temperature controller : PID Z control
Temp. setting method : Digital setting with ▲/▼ keys
Timer : 0 min~99 hrs 59 min (Resolution: 1 minute or 1 hour)
Operation functions : Fixed temperature operation, Program operation (Maximum 99 steps, up to 99 patterns, repeat operation function) Duration/time select timer operation function (Fixed temperature operation, auto start/auto stop/quick auto stop, program operation auto start)
Additional functions : Accumulated Power on and Operation Time (up to 65,535 hours); Calendar Time (24 hours); Calibration Offset; Monitor Display of Accumulated Power Consumption, Total CO2 Emission, and Heater operating Output; Power Recovery Mode; User Settings Save and Restore Function; Fan Speed Setting Function
Sensor : K-thermocouple (double sensor)
Heater : Stainless steel pipe heater with a fan 9.0kW
Fan motor : Stainless steel axial flow fan (capacitor motor: 20W), Two motors used for Model1032
Cable port : I.D. ø30mm (rear)
Heat insulator : Glass wool + ceramic fiber
Other additional structure : Exhaust damper (manual operation)
Safety device : Self-diagnostic functions (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), Door switch,
Fan Failure Detection, key lock, independent overheat protection, electric leakage breaker with over current protection
Internal dimensions (WxDxH) : 1,000 x 1,000 x 1,000mm
External dimensions (WxDxH) : 1,700 x 1,215 x 1,530mm
Internal capacity : 1000L
Power source : 3 phase AC220V 28A
Weight : ~450kg
Shelf / bracket : 3 pcs. / 6 pcs.