Circulation method : Forced air circulation
Operating temperature range : Room temp. +10~260°C
Temp. control accuracy : ±1°C (at 210°C)
Temp. distribution accuracy : ±2.5°C (at 210°C)
Max. temp. reaching time : ~90min (at room temp. +10°C~260°C)
Interior material : Stainless Steel
Exterior material : Cold rolled steel plate with melamine resin baking finish
Heat insulating material : Glass wool
Heater : SUS pipe heater 0.8kW
Fan type / Motor : Scirocco fan / Condenser type motor 10W
Cable port : 30 mm l.D.×1 pc. (right side)
Exhaust port : 30 mm l.D.×2 pcs.(the top)
Temp. controller : PlD control by microprocessor
Temp. setting method : Operation menu key and digital setting by UP/DOWN key
Temp display method :
Measurement temp. : Digital display by green LED
Setting temp. : Digital display by red LED
Timer : 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. (with time wait function)
Operation functions : Fixed temperature operation, Quick Auto-stop, Auto start, Auto stop
Additional functions : Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control : SSR control
Sensor : K-thermocouple
Safety device : Self diagnostic functions (Sensor trouble detection, Memory error, Measured temperature lower limit error, Measured temperature error), Auto overheat prevention, Independent overheat prevention.
Internal dimensions (W×D×H) : 300×300×300mm
External dimensions*(W×D×H) : 410×451×670mm
Internal capacity : 27L
Shelf plate with standard load : 15kg/piece
Shelf rest step number : 6 steps
Shelf rest pitch : 35mm
Power source 50/60Hz : AC115V 7.5A / AC220V 4.5A
Weight : ~35kg
Shelf plate : Stainless steel 2 pcs.
Shelf bracket : 4 pcs.