Yamato Forced Convection Oven Programmable 27L 115V 7.5A 50/60Hz
Standard forced air convection ovens are programmable and come with extended functions and safety features.
Operation and functions
Best seller based on excellent performance & affordability .
Superior temperature accuracy .
DKN302C/312C/402C/412C/602C/612C come with observation windows
Programmable PID controller for easy program settings 30-step, 3-pattern program controller with repeat functions .
Fixed setting, programmed, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities .
Increased safety and Self-diagnostic function
Over-heating prevention and calibration off-set are possible with auxiliary functions
Easy to use and maintain .
Built in exhaust ports .
Self diagnosis functions (Temperature sensor abnormal, Heater disconnection, SSR-short) Automatic overheating prevention, Electric leakage breaker with over current protection, Key lock function
Circulation method : Forced air circulation
Operating temperature range : Room temp. +10?C to 260?C
Temp. adjustment accuracy : ?1?C (at 210?C)
Temp. distribution accuracy : ?2.5?C (at 210?C)
Max. temp. reaching time : ~90min
Interior material : Stainless Steel
Exterior material : Cold rolled steel plate with melamine resin baking finish
Heat insulating material : Glass wool
Heater : Stainless pipe heater 0.8kW
Fan type / Motor : Scirocco fan, Condenser type motor 10W
Cable hole : 30mm I.D. (on the right side) 1pc.
Exhaust port : 30mm I.D. x 2 (on top)
Observation window : 180?180mm Chemical strengthening glass x 3
Temp. controller : 3 patterns program controller, PID control by microprocessor
Temp. setting method : Digital setting by UP/DOWN key
Temp display :
Measurement temp. : Digital display by green LED
Setting temp. : Digital display by red LED
Timer : 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation functions : Fixed temperature operation, Program operation, Auto start, Quick Auto-stop
Program mode : Program operation : 3 patterns, 30 steps(30 steps?1, 15 steps?2, 10 steps?3) Pattern repeat function
Additional functions : Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control : SSR control
Sensor : K-thermocouple
Safety device : Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
External dimensions : L36″ x W36″ x H37″
Internal capacity : 27L
Shelf plate with standard load : ~15kg/piece
Shelf rest step number : 9 steps
Shelf rest pitch : 30mm
Power source 50/60Hz : 115V, 7.5A
Weight : 112 LBS
Shelf plate : Stainless steel, 1pc on the bottom screwed (DKN912C, 2 pcs).
Shelf plate / bracket : 2 pcs. / 4 pcs.
There are no reviews yet.