Yamato Forced Convection Oven Programmable Energy Saving 90L 220V 5.5A 50/60Hz
  • Yamato Forced Convection Oven Programmable Energy Saving 90L 220V 5.5A 50/60Hz

Yamato Forced Convection Oven Programmable Energy Saving 90L 220V 5.5A 50/60Hz

$3,972.50

Savings: $567.50

Availability:: Usually Ships in 14 to 15 Weeks

$
Add to wishlist
SKU: DNE-410

Description

Yamato Forced Convection Oven Programmable Energy Saving 90L 220V 5.5A 50/60Hz

Environment friendly Eco-Oven with lower power consumption and lower CO2 emission .

Standard Features

Operation and functions

Program featured eco-oven to reduce power consumption significantly .

Heat tightness and insulation design of the chamber make the oven save 30% of energy during constant temperature (compared to previous models) .

Maximum temperature reaching time up to 15 minutes shorter (no-load) compared to previous models. More efficient with less standby time and recovery time .

High airtightness, dust can hardly enter the chamber .

Standard equipped with constant operation, program operation, Auto-stop, Auto-start and Quick auto stop (for DNE401/601) .

Temperature and time setting displayed by fluorescent display, enriched with calibration offset function .

Easy system upgrade with various option settings .

Safety features

Standard equipped with various self-diagnostic functions such as independent overheat prevention device, overcurrent circuit breaker, and key lock function .

Additional information

Weight218 lbs
Dimensions36 × 36 × 44 in
Liters

90

Voltage

220

Circulation method : Forced air circulation

Operating temperature range : RT+10?C to 210?C

Temp. adjustment accuracy : ?0.5?C (at 210?C)

Temp. distribution accuracy : ?2.0?C (at 210?C)

Max. temp. reaching time : ~60min

Interior material : Stainless Steel

Exterior material : Electro-galvanized steel sheet with epoxy and melamine resin baking finish

Heat insulating material : Glass wool

Heater : Stainless pipe heater 1.1kW
Fan type / Motor : Scirocco fan, Condenser type motor 10W

Cable hole (right side) : 30mm I.D. 1pc.
Air in-take hole (right side) : 30mm I.D. 1pc.

Exhaust port : 30mm I.D. 2pcs. (top)
Observation window : Optional for DNE401/410/601/610

Temp. controller : PID control by microprocessor

Temp. setting method : Digital setting by ?/? key

Temp. / Info display :

Orange 4 digit LED digital display (for DNE410/610/810/910) (1?C resolution)

Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (for DNE401/601)

Timer / Min.division : 1 min. to 99 Hrs. 59 min. /1 min.

Operation functions : Fixed temperature, Program operation, Auto-start, Auto-stop (for all models), Quick auto stop (for DNE401/601)
Additional functions : Timer, Integration time function, Calendar time, Calibration offset function, Time display (for all models), Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information (for DNE401/601)

Heater circuit control : Triac zero-cross control

Sensor : K-thermocouple

Safety device : Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection

External dimensions : L36″ x W36″ x H44″

Internal capacity : 90L

Shelf plate with standard load : ~15kg/piece

Shelf rest step number : 11 steps

Shelf rest pitch : 30mm

Power source 50/60Hz : AC220V 5.5A

Weight : ~60kg

Shelf plate : Stainless steel, 1pc on the bottom screwed (DNF910, 2 pcs)

Shelf plate / bracket : 2 pcs. / 4 pcs.

Reviews

There are no reviews yet.

Be the first to review “Yamato Forced Convection Oven Programmable Energy Saving 90L 220V 5.5A 50/60Hz”

Your email address will not be published.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Wishlist 0
    Open wishlist page Continue shopping