Yamato Forced Convection Oven Programmable Energy Saving 150L 115V 11A 50/60Hz
Environment friendly Eco-Oven with lower power consumption and lower CO2 emission .
Operation and functions
Program featured eco-oven to reduce power consumption significantly .
Heat tightness and insulation design of the chamber make the oven save 30% of energy during constant temperature (compared to previous models) .
Maximum temperature reaching time up to 15 minutes shorter (no-load) compared to previous models. More efficient with less standby time and recovery time .
High airtightness, dust can hardly enter the chamber .
Standard equipped with constant operation, program operation, Auto-stop, Auto-start and Quick auto stop (for DNE401/601) .
Temperature and time setting displayed by fluorescent display, enriched with calibration offset function .
Easy system upgrade with various option settings .
Standard equipped with various self-diagnostic functions such as independent overheat prevention device, overcurrent circuit breaker, and key lock function .
Circulation method : Forced air circulation
Operating temperature range : RT+20?C to 210?C
Temp. adjustment accuracy : ?0.5?C (at 210?C)
Temp. distribution accuracy : ?2.0?C (at 210?C)
Max. temp. reaching time : ~70min
Interior material : Stainless Steel
Exterior material : Electro-galvanized steel sheet with epoxy and melamine resin baking finish
Heat insulating material : Glass wool
Heater : Stainless pipe heater 1.2kW
Fan type / Motor : Scirocco fan, Condenser type motor 10W
Cable hole (right side) : 33mm I.D. 1pc.
Air in-take hole (right side) : 33mm I.D. 1pc.
Exhaust port : 33mm I.D. 2pcs. (top)
Observation window : Optional for DNE401/410/601/610
Temp. controller : PID control by microprocessor
Temp. setting method : Digital setting by ?/? key
Temp. / Info display :
Orange 4 digit LED digital display (for DNE410/610/810/910) (1?C resolution)
Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (for DNE401/601)
Timer / Min.division : 1 min. to 99 Hrs. 59 min. /1 min.
Operation functions : Fixed temperature, Program operation, Auto-start, Auto-stop (for all models), Quick auto stop (for DNE401/601)
Additional functions : Timer, Integration time function, Calendar time, Calibration offset function, Time display (for all models), Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information (for DNE401/601)
Heater circuit control : Triac zero-cross control
Sensor : K-thermocouple
Safety device : Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
External dimensions : L36″ x W36″ x H46″
Internal capacity : 150L
Shelf plate with standard load : ~15kg/piece
Shelf rest step number : 13 steps
Shelf rest pitch : 30mm
Power source 50/60Hz : AC115V 14A
Weight : 245 LBS
Shelf plate : Stainless steel, 1pc on the bottom screwed (DNF910, 2 pcs)
Shelf plate / bracket : 2 pcs. / 4 pcs.