Yamato Inert Oven Programmable 95L 220V 13.5A 50/60Hz
  • Yamato Inert Oven Programmable 95L 220V 13.5A 50/60Hz

Yamato Inert Oven Programmable 95L 220V 13.5A 50/60Hz


Savings: $1,073.75

Availability:: Usually Ships in 14 to 15 Weeks

Add to wishlist
SKU: DN-411E


Yamato Inert Oven Programmable 95L 220V 13.5A 50/60Hz

Inert oven suitable for temperature test and heat treatment in a non-oxidizing environment, by introducing N2 gas into chamber.

Standard Features

Operation and functions

Heat resistance test and heat treatment of up to 360oC

Simple operation by interactive key input

Standard equipped with various operation modes such as program operation and calibration offset function, power failure recovery mode selection, and user configuration information saving

Repeatable operation function up to maximum 99 steps, 99 patterns controller with repeat function

N2 gas flow amount controllable

Safety features

Enhanced safety countermeasure, including self-diagnostic functions, digital setting independent overheat prevention device and electric leakage breaker

In case of door opening during operation, fan and heater turn OFF by door switch

Additional information

Weight293 lbs
Dimensions36 × 36 × 46 in




  • System : Forced Convection
  • Operating temperature range : Room Temp. +15 to 360oC
  • Temp. Adjustment Accuracy : ?0.2oC (at 360oC)
  • Temp. fluctuation : ?0.6oC (at 360oC)
  • Temp. uniformity : ?3oC(at 360oC)
  • Temp. gradient : 12oC(at 360oC)
  • Max. temp. reaching time : ~60 min.
  • Nitrogen substitution time required : ~30 min. (ordinary temp with nitrogen concentration of 2%)
  • Interior : Stainless steel plate
  • Exterior : Cold rolled steel plate with baked melamine resin coating
  • Heat insulator : Glass wool + Ceramic fiber
  • Heater : SUS Pipe Heater 3.0kW
  • Sensor : K thermocouple for temperature control and independent overload prevention device
  • Fan type / Motor : Sirocco Fan / Condenser Type
  • Flow meter, Gas carrier : Max. Flow 30L/min, O.D. 9mm Hose Nipple
  • Temp. controller : PID Control by Microcomputer
  • Temp. display type : Temp. display: Digital display by 4 digit green LED (resolution:1oC) Setting temp. display: Digital display by 5 digit orange LED (resolution:1oC)
  • Timer / Timer resolution : 1min. ~ 99hrs. 59mins. or 100hrs. ~ 999hrs. / 1min. or 1hr.
  • Operation function : Fixed temp. operation, Auto-start, Auto-stop, Quick auto-stop, Program Operation
  • Program mode : Repeatable operation function up to max 99 steps or 99 patterns.
  • Additional functions : Power on and operation time integrating function (up to 65535 hours), calendar time (24 hours), calibration offset, Monitor display of integrated power consumption, total CO2 emissions and heater operating output, power failure recovery mode, save and read out of user settings
  • Heater circuit control : Triac with Zero-cross
  • Safety device : Self diagnostic functions (Sensor failure, SSR short circuit, Heater line disconnection, Main Relay contact damaged, Automatic overheat prevention), Key lock function, Independent overheating prevention, Electric leakage breaker, Door switch
  • External dimensions : L36″ x W36″ x H49″
  • Internal capacity : 95L
  • Shelf max. load : ~30kg / shelf
  • Shelf support qty. / Pitch : 12pcs. / 30mm
  • Power source : Single phase 220V 13.5A
  • Weight : 285 LBS
  • Shelf plate / bracket : Stainless wire, 2 pcs. / 4 pcs.


There are no reviews yet.

Be the first to review “Yamato Inert Oven Programmable 95L 220V 13.5A 50/60Hz”

Your email address will not be published.

    Your Cart
    Your cart is emptyReturn to Shop
    Wishlist 0
    Open wishlist page Continue shopping