INERT OVEN PROGRAMMABLE 220V - Global Lab Supply
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V
  • INERT OVEN PROGRAMMABLE 220V

INERT OVEN PROGRAMMABLE 220V

$7,823.00$8,470.00

Clear
Add to wishlist
SKU: DN-11

Description

INERT OVEN PROGRAMMABLE 220V

Inert ovens suitable for temperature test and heat treatment in a non-oxidizing environment, by introducing N₂ gas into the chamber

Operation and functions

  • Heat resistance test and heat treatment of up to 360°C
  • Simple operation by interactive key input
  • Standard equipped with various operation modes such as program operation and calibration offset function, power failure recovery mode selection, and user configuration information saving
  • Repeatable operation function up to maximum 99 steps, 99 patterns controller with repeat function
  • N₂ gas flow amount controllable

Additional information

Weight290 lbs
Dimensions36 × 36 × 46 in
Voltage

223L, 95L

SystemForced Convection
Operating Temp. RangeRoom Temp. +15 to 360°C
Temp. adjustment accuracy±0.2°C (at 360°C)
Temp. fluctuation±0.6°C (at 360°C)
Temp. uniformity±3°C (at 360°C)
Temp. gradient12°C (at 360°C)20°C(at 360°C)
Max. temp. reaching time~60 min.
Nitrogen substitution time required~30 min.
(ordinary temp with oxygen concentration of 2%)
~70 min.
(ordinary temp with oxygen concentration of 2%)
InteriorStainless steel plate
ExteriorCold rolled steel plate with baked melamine resin coating
Heat insulatorGlass wool + Ceramic fiber
HeaterSUS Pipe Heater 3.0kWSUS Pipe Heater 4.0kW
SensorK thermocouple for temperature control and independent overload prevention device
Fan type / MotorSirocco Fan / Condenser Type
Flow meter, Gas carrierMax. Flow 30L/min, O.D. 9mm Hose Nipple
Temp. controllerPID Control by microcomputer
Temp. display typeTemp. display: Digital display by 4 digit green LED (resolution:1°C) Setting temp. display: Digital display by 5 digit orange LED (resolution:1°C)
Timer / Timer resolution1min. ~ 99hrs. 59mins. or 100hrs. ~ 999hrs. / 1min. or 1hr.
Operation functionFixed temp. operation, Auto-start, Auto-stop, Quick auto-stop, Program Operation
Program modeRepeatable operation function up to max 99 steps or 99 patterns.
Additional functionsPower on and operation time integrating function (up to 65535 hours), calendar time (24 hours), calibration offset, Monitor display of integrated power consumption, total CO₂ emissions and heater operating output, power failure recovery mode, save and read out of user settings
Heater circuit controlTriac with Zero-cross
Safety deviceSelf diagnostic functions (Sensor failure, SSR short circuit, Heater line disconnection, Main Relay contact damaged, Automatic overheat prevention), Key lock function, Independent overheating prevention, Electric leakage breaker, Door switch
Internal Dimensions WxDxH470 x 450 x 450 mm620 x 600 x 600 mm
External Dimensions WxDxH640 x 695 x 915 mm790 x 845 x 1065 mm
Internal Capacity95L223L
Shelf max. load~30kg / shelf
Shelf support qty. / Pitch12pcs. / 30mm17pcs. / 30mm
Power sourceSingle phase 220V 13.5A (no plug, round terminal)Single phase 220V 19A (no plug, round terminal)
Weight~90kg~130kg
Included accessoriesShelf plate / bracket (stainless wire) 2 pcs. / 4 pcs.
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Wishlist 0
    Open wishlist page Continue shopping