LOW TEMP INCUBATOR, WNDOW 143L - Global Lab Supply
  • LOW TEMP INCUBATOR, WNDOW 143L
  • LOW TEMP INCUBATOR, WNDOW 143L
  • LOW TEMP INCUBATOR, WNDOW 143L
  • LOW TEMP INCUBATOR, WNDOW 143L
  • LOW TEMP INCUBATOR, WNDOW 143L
  • LOW TEMP INCUBATOR, WNDOW 143L

LOW TEMP INCUBATOR, WNDOW 143L

$4,760.00

Clear
Add to wishlist
SKU: IN-604

Description

LOW TEMP INCUBATOR, WNDOW 143L

Standard low temperature forced convection incubators applicable for low temperature tests and environmental tests

Operation and functions

  • High accuracy temperature control and temperature distribution
  • Inner glass door keeps temperature stable during sample observation
  • Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W)
  • Interior light for better sample visibility (IN604W/804W)
  • Optional slide shaker table available to put in and take out samples easily (IN604W)

Additional information

Weight310 lbs
Dimensions36 × 36 × 49 in
Voltage

115v, 220v

SystemForced air convection
Operating temperature range-10°C~+50°C
Temperature adjustment accuracy±0.3°C (refrigerator in continuous operation) / ±1.0°C (refrigerator in cycle operation)
Temp. distribution accuracy±1.0°C (refrigerator in continuous operation at 37°C)
Max. temp. reaching time20~50°C ~20min20~50°C ~30minData unavailable
Minimum temp. reaching time20~-10°C ~ 45min20~-10°C ~55min20~-10°C ~65minData unavailable
Interior materialStainless steel
Exterior materialChrome free electronic galvanized plated steel plate chemical proof baking finish
Observation windowW516 x H416mm (with key)Data unavailbale
Heat insulation materialStyrene foam
RefrigeratorAir-cooled fully closed compressor 250WAir-cooled fully closed compressor 300W
Refrigerator mediumR134AR404A
Defrosting mechanismManual ON / Auto OFF, Timer operation, Cycle operation
Blower fanAxial fan
HeaterIron-chrome wire heater: 550WIron-chrome wire heater: 750W
SensorPlatinum resistance temperature detector: Pt100Ω (temp. controller), K-thermocouple (overheat prevention device)
Cable port (right side)I.D.: 32 mmI.D.: 50 mmI.D.: 32 mmI.D.: 32 mm
Temperature controlPID control
Temperature settingDigital setting with ▲▼ keys
Temperature displayMeasured temperature: 4-digit orange LED digital display + VFD fluorescent display
Timer / timer resolution0 min. ~ 999 hrs. 59 min. / 1 min.
Operation functionFixed temperature, auto stop, auto start, program (up to 32 steps, repeat operation)
Additional functionsTimer function (accumulated time to 49,999 hrs), calibration off-set function, clock display
Safety deviceSelf diagnostic function (Temp. sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention function), Key lock, Over current ELB, Overheat prevention device
Internal dimensions W x D x H600 x 477 x 500 mm600 x 477 x 1000 mm
External dimensions W x D x H710 x 645 x 913 mm710 x 645 x 1630 mm
Internal capacity143L286L
Shelf plate load15kg / pc.
Shelf rest step number / pitch13 steps / 30mm23 steps / 30mm
Power supply (50/60Hz)AC115V 9A (with plug)
AC220V 5.5A (no plug, round terminal)
AC115V 10.5A (with plug)
AC220V 7.5A (no plug, round terminal)
AC115V 10.5A (with plug)
AC220V 6A (no plug, round terminal)
AC115V (with plug)
AC220V (no plug, round terminal)
Weight~89kg~ 120kg
Included accessoriesShelf and brackets (stainless steel punched metal)
3 pcs. shelves / 6 pcs. brackets5 pcs. shelves / 10 pcs. brackets
Door keys2 keys2 keys
Optional accessoriesStand, additional shelf, cable port (ø30/50mm), recorder, warning light combination (stand-by/operation/error), observation window, temperature output terminal (4-20mA), external alarm output terminal, time up output terminal
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Wishlist 0
    Open wishlist page Continue shopping