NATURAL CONVN HI TEMP OVEN 13.75L - Global Lab Supply
    • NATURAL CONVN HI TEMP OVEN 13.75L
    • NATURAL CONVN HI TEMP OVEN 13.75L
    • NATURAL CONVN HI TEMP OVEN 13.75L

    NATURAL CONVN HI TEMP OVEN 13.75L

    $5,439.00

    Clear
    Add to wishlist
    SKU: DR-200

    NATURAL CONVN HI TEMP OVEN 13.75L

    Programmable natural convection oven with high accuracy control at high temperature range

    Performance and functions

    • Wide temperature range, maximum operation temperature up to 700°C
    • Equipped with high operability temperature controller
    • Can be used as an electric furnace for ashing and sintering, but also as an incubator and drying oven
    • Temperature, measured temperature and overheat prevention temperature can be digitally set by operation menu and ▲/▼ keys
    • Easy programmable operation, fixed temperature, quick auto stop, auto stop, program auto start, auto start
    • Lock function, auto recovery after power failure, calibration offset

    Safety features

    • Self-diagnostic functions (automatic overheat prevention, temperature sensor failure, heater disconnection, SSR short circuit, main relay failure, memory error, internal communication error, abnormal temperature reading), Overcurrent ELB, Overheat prevention device
    Weight111 lbs
    Dimensions28 × 28 × 34 in
    Voltage

    115v, 220v

    Brand

    Yamato

    SystemNatural convection
    Temp. control range*300~700°C
    Temp. control accuracy*±5°C (at 700°C)
    Temp. fluctuation*10°C (at 700°C)
    Temp. distribution accuracy*±25°C (at 700°C)
    Temp. gradient*30°C (at 700°C)
    Temp. rise time*~70 min. (Room temp. +5°C~700°C)
    Temp. fall time*~150 min. (700°C to 300°C)
    Interior materialStainless steel sheet metal
    Exterior materialChromium-free electrogalvanized steel sheet, baked-on finish
    Heat insulating materialCeramic fiber rock wool
    Heater type / capacityIron-chrome wire heater / 1.3kW
    Temp. controllerPID control by microcomputer
    Temp. setting methodDigital setting by operation menu key and ▲/▼ keys
    Temp. displayTemp. reading display: Green 4 digit LED digital display / Temp. setting display: Red 4 digit LED digital display
    Timer function0 to 99 hrs 59 mins. and 100 hrs. to 999 hrs 50min.
    Timer resolution1 minute increments under 99 hours and 59 minutes,
    10 minutes after 100 hours.
    Wait functionTimer wait function (ON/OFF setting)
    Operation modesFixed temperature, program, program auto start, auto start, quick auto stop, auto stop
    Program modes6 patterns (PrG1: 30 steps, PrG2-3: 15 steps, PrG4-6: 10 steps) step weight function, repeat function, step hold function, step skip function
    Additional functionsCalibration offset, keypad lock, auto resume mode select
    SensorK thermocouple (W sensor)
    Safety deviceSelf-diagnostic functions (automatic overheat prevention, temp. sensor failure, heater disconnection, SSR short circuit, main relay failure, memory error, internal comm. error, abnormal temp. reading), overcurrent ELB, overheat prevention device
    Internal dimension250 x 250 x 220 mm (WxDxH)
    External dimension520 x 443 x 612 mm (WxDxH) (protrusions excluded)
    Internal capacity13.75L
    Shelf load capacity15 kg. / pc. Total load capacity 30 kg.
    Shelf rest step number3 steps
    Shelf rest pitch33mm
    Power source (50/60Hz)AC115V 11.5A (with plug)
    AC220V 6.0A (with plug)
    Weight~36kg
    Shelf platePerforated stainless steel plate
    Included accessories2 pcs. shelf plate
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop
      Wishlist 0
      Open wishlist page Continue shopping